- EUROMUZIKA

Go to content

Main menu:

PRODUCTS > STUDIO > INTERFACE AUDIO
ROLAND UA-1610

Features

  • High-performance USB 2.0 audio interface for studio and mobile production
  • 16 audio inputs and 10 audio outputs, including 12 premium mic preamps (VS PREAMP)
  • VS STREAMING delivers ultra-stable, low-latency driver performance for Windows and Mac
  • AUTO-SENS intelligently sets optimal input levels for all preamps
  • Individual input/output meters and input channel buttons
  • Four independent, software-controlled monitor mixes
  • XLR monitor out, direct monitor, and dual headphone outputs with independent front-panel level knobs
  • Coaxial digital I/O; MIDI I/O with FPT
  • Expand your I/O by using two STUDIO-CAPTUREs together, both controlled with a single driver
  • 2U rackmount ears included

Number of Audio Record/Playback Channels
Sampling Rate: 96 kHz, 48 kHz, 44.1 kHz
Record: 16 channels
Playback: 10 channels
Sampling Rate: 192 kHz
Record: 8 channels
Playback: 4 channels

Signal Processing
PC interface: 24 bits
AD/DA Conversion: 24 bits

Sampling Rate
AD/DA Conversion: 192 kHz, 96 kHz, 48 kHz, 44.1 kHz
DIGITAL (IN/OUT): 96 kHz, 48 kHz, 44.1 kHz

Nominal Input Level (variable)
Input 1–12 jacks (XLR type): -60 to -2 dBu
Input 1–12 jacks (1/4-inch TRS phone type): -54 to +4 dBu
Input 13–16 jacks (1/4-inch TRS phone type): -20, -10, +4 dBu

Nominal Output Level
OUTPUT 1–8 jacks: +4 dBu (balanced)

Headroom: 18 dB

Output Impedance
OUTPUT 1–2 jacks (XLR type): 600 ohms (balanced)
OUTPUT 1–8 jacks (1/4-inch TRS phone type): 2k ohms (balanced)
PHONES: 47 ohms

Frequency Response
192.0 kHz: 20 Hz to 60 kHz (+0/-2 dB), 20 Hz to 90 kHz (+0/-8 dB)
96.0 kHz: 20 Hz to 40 kHz (+0/-2 dB)
48.0 kHz: 20 Hz to 22 kHz (+0/-2 dB)
44.1 kHz: 20 Hz to 20 kHz (+0/-2 dB)

Residual Noise Level
INPUT 1–2 -> OUTPUT 1–2: -90 dBu typ. (SENS = min., Input terminated with 600 ohms, IHF-A)
* Input channel fader = Unity

Dynamic Range
AD block INPUT 1–2: 105 dB typ. (SENS = min.)
DA block OUTPUT 1–2: 114 dB typ.
Display: Graphic LCD 128 x 64 dots

Connectors
INPUT 1–12 jacks *1: XLR type (balanced, phantom power *2: DC +48 V (unloaded maximum), 10 mA (maximum load))
INPUT 1–16 jacks: 1/4-inch TRS phone type (balanced)
PHONES jack: Stereo 1/4-inch phone type
OUTPUT 1–8 jacks: 1/4-inch TRS phone type (balanced)
COAXIAL IN jack: RCA phono type (conforms to IEC60958)
COAXIAL OUT jack: RCA phono type (conforms to IEC60958)
MIDI (IN, OUT) connectors
USB port: USB Type B
DC IN jack

*1 INPUT 1–2 jacks support high impedance
*2 Provided on all XLR-type input jacks. Current value is per channel. Total must not exceed 50 mA.

Interface: Hi-Speed USB
Power Supply: AC adaptor
Current Draw: 1.6 A






 
Back to content | Back to main menu