Dynacord Power Mate 1000-3 - EUROMUZIKA

Go to content

Main menu:

PRODUCTS > PROFFERSIONAL AUDIO > POWER MIXER
DYNACORD POWER MATE 1000-3
    
POWERMATE 1000-3

10‑CHANNEL COMPACT POWER‑MIXER
Intuitive mixer with 10 input channels (6 Mic/Line + 4 Mic/Stereo-Line)
Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
2 High-Quality editable effects, 100 factory and 20 user presets
Professional 4x4 24-bit / 96 kHz USB interface with MIDI
Lightweight (14 kg) road-ready package with extra robust cover-lid
The PowerMate compact power mixers incorporate profound know‑how, based on our research, development and inter‑communication with our customers in the professional audio market, for decades.

It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand‑alone device. The PowerMate is a real all‑rounder for almost all applications with maximum feature set at minimum size.

The mixing section starts with 10 lowest noise, discrete microphone preamps. 6 auxiliary busses, two of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate‑reverbs. Further, each preset can be edited and stored to 20 User memories.

The built in USB audio interface shares 4 playback and four recording channels simultaneously with a PC or Mac, following studio standard 24‑bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package.

The 11 band stereo graphic equalizer can be routed flexible to master or monitor channels.

The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class‑D output stage, it’s very efficient and lightweight, too. An optional speaker protection allows limitation of long‑term power without giving up dynamics.

Finally, the slim housing is protected by a rugged plastic lid with integrated handle for easy transportation.

SPECIFICATIONS

DIM 30 <0.05%%
Crosstalk < Amplifier L/R: < -85dB; Channel to Channel: < -80 dB; Mute- and Standby-Switch attenuation: > 100 dB; Fader and FX/AUX/MON-Send attenuation: > 85dBdB
Frequency Response (-3 dB) Any input to any Mixer output: 15Hz to 70kHz; Any input to Speaker L/R output: 20Hz to 30kHzHz

Signal-to-Noise Ratio (A-weighted) 105dBdB
Power Requirement 100V to 240VAC, 50Hz to 60Hz
Power Consumption 450W
Cooling Continuous speed controlled Fans
Height 164.5mm (6.48")
Width 510.5mm (20.1")
Depth 571.5mm (22.5")
Weight Net 14kg (30.86 lbs)
Auxiliarys (MON, FX, AUX) 2 Pre, 2 Post, 2 Pre/Post switchable
Channels 6
CMRR, MIC input, 1 kHz >80dB
Digital Audio Interface Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
Displays 128 x 64 pixels, OLED
Effects Type: Dual stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
Equalization LO Shelving: ±15dB / 60Hz; MID Peaking, mono inputs: ±15dB / 100Hz to 8kHz; MID Peaking, stereo inputs: ±12 dB / 2.4 kHz; HI Shelving: ±15 dB / 12 kHz; Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz): ±10dB/Q = 1.5 to
Equivalent Input Noise, MIC input, A-weighted, 150 ohms -130dBu
Filter LO-CUT, mono inputs: f=80Hz, 18dB/oct.; VOICE FILTER, mono inputs: switchable; FEEDBACK FILTER, MON ½: 70Hz to 7kHz, Notch, -9dB; Speaker Processing: LPN, switchable
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz <0.15%
Input Impedances MIC: 2㏀; Insert Return: 3.3㏀; 2Track Return & CD In: 10㏀; All other inputs: > 15㏀
Input Sensitivity MIC: -74dBu (155μV); LINE (Mono): -54dBu (1.55mV); LINE (Stereo): -34 dBu (15.5mV); CD (Stereo): -34dBu (15.5mV); POWER AMP INPUTS: +8dBu (1.95V)
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1150W; into 8Ω: 2 x 650W
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A into 2.66Ω: 2 x 1600W; into 4Ω: 2 x 1250W; into 8Ω: 2 x 675W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 2.66Ω: 2 x 1350W; into 4Ω: 2 x 1000W; into 8Ω: 2 x 600W
Maximum Output Voltage 74 Vrms
Maximum SPL MIC inputs: +21dBu; Mono Line inputs: +41dBu; Stereo Line inputs: +30dBu; All other inputs: +22dBu; All other outputs: +22dBudB
MIDI Interface 5-pin DIN connector, In / Out
Noise, Channel inputs to Master A L/R outputs, A-weighted Master Fader down: -97dBu; Master fader 0dB, Channel fader down: -91dBu; Master fader 0dB, Channel fader 0dB, Channel gain unity: -83dBu
Operating Temperature Range +5 °C…+40 °C (40 °F…105 °F)
Output Impedances Phones: 47Ω; All other outputs: 75Ω (unbalanced), 150Ω (balanced)
Output Power Control (Speaker Protection) Adjustable longterm RMS Limiter
Output Stage Topology, amplifier Class D
Phantom Power 48VDC
Protection Mixer Outputs (Relay controlled): MON 1, MON 2, MASTER A; Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF; Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz into 4Ω: 2 x 900W; into 8Ω: 2 x 450WW
Safety Class I
Shipping Weight 17kg (37.48 lbs)
Total Harmonic Distortion MIC input to Master A L/R outputs, +16dBu, typical: < 0.005%; POWER AMP INPUTS to Speaker L/R outputs: < 0.075%%
 
Back to content | Back to main menu